Search

Search

FREE Shipping On Orders Over $399*

REALCRAFT CUSTOM DESIGN DEPARTMENT


Email us at info@realcraft.com
Call us at (253) 853-3811

9656 Bujacich Rd NW
Bldg E, Ste A
Gig Harbor, WA 98332


Hours of Operation:
M-F, 7:00 AM to 4:00 PM Pacific Time


We ship to the U.S.A. & Canada.


Let's Get Started!

FREE Shipping On Orders Over $399*

Osmo Exterior End Grain Sealing Wax

Please note: in California, Osmo End Grain Sealing Wax cannot be shipped to Los Angeles, Orange, San Bernardino, or Riverside Counties due to restrictions.

Osmo End Grain Sealing Wax is perfect for all exterior wood projects where the end grain is exposed. End Grain Sealing Wax is water and dirt resistant, ideal for use as a decking end grain sealer. It also prevents cracking, swelling, and shrinkage. Clear and transparent, the End Grain sealing wax is made from renewable plant oils and waxes for a natural alternative to traditional wood finishes.

    End Grain Sealer Made From Plant Oils 

    Osmo End Grain Sealing Wax is designed for the end grains of decking, cladding or roof soffits made of hard and softwoods, such as Teak, Pine, Spruce, Douglas Fir, Larch, Cedar, and others. It minimalizes the moisture loss, water absorption, and cracking that can happen to exterior end grain surfaces. Easy to apply and low maintenance, the End Grain Sealing Wax is made from plant oils and waxes including sunflower oil and carnauba wax, making it a good natural alternative to traditional urethane based finishes.

    The end grain should be clean, dry and free from surface contaminates that may form a barrier or seal.

    • Apply to the raw end grain only. Do not use Osmo End Grain Sealing Wax on large areas.
       
    • To achieve the best protection, we recommend to apply 2 coats successively, wet on wet.
    • Recommended application amount of 150ml/m² for first coat, and 50 ml/m² for the second coat.
    • 375ml covers approximately 250 decking boards on both ends.

     

    Application

     

    Always do a small test area before starting any project to assess if the product is compatible and to anticipate the end result. Follow the manufacturer’s instructions on the tin at all times.

    1. Apply End Grain Sealing Wax generously to end grains with an Osmo Flat Brush.
    2. For optimal protection, apply the sealing wax two times wet-in-wet or carry out a second coat right after drying.
    3. Wipe away any excess wax from other areas with a clean, lint-free cloth

     

    Aftercare

     

    For routine maintenance, simply re-apply Osmo End Grain Sealing Wax to exposed end grain when required. 

    Additional Information

     

    Weight.01 lbs
    Specific Gravity0.88-0.95 g/cm³
    Viscosity25-35s DIN EN ISO 2431/4 mm, thixotropic
    Odorfaint/mild, odorless after drying
    Flash Point45-52°C acc. DIN EN ISO 2719
    Sizes375mL, Sample Sachet (5mL)
    Number of Coats2 coats
    Approx. CoverageUp to 5m² per litre
    Approx. Dry Time4hrs.

     

    Data Sheets