Free Shipping on Orders Over $399*!

Free Shipping on Orders Over $399*!



FREE Shipping On Orders Over $399*


Email us at
Call us at (253) 853-3811

9656 Bujacich Rd NW
Bldg E, Ste A
Gig Harbor, WA 98332

Hours of Operation:
M-F, 7:00 AM to 4:00 PM Pacific Time

We ship to the U.S.A. & Canada.

Let's Get Started!

FREE Shipping On Orders Over $399*

Osmo Wood Wax Finish Intensive

Please note: Osmo Wood Wax Intensive Finish cannot be shipped to the greater Los Angeles, CA area due to restrictions. 

Osmo Wood Wax Intensive Finishes provide vibrant color, high coverage, and durable protection. This innovative, plant-based wood finish combines all the advantages of oils and waxes into one easy-to-use product. The waxes smooth the wood surface. while the oils penetrate to protect from within. It's easy to apply and touch up, and you can use it for most interior applications. When dry, the surface is non-toxic and safe for humans, plants, and animals.

Brightly Colored Intensive Wood Finish 

The Wood Wax Finish Intensive features bright, vivid shades that make a statement. You can apply one coat of these intensive tones for a softer payoff that lets the wood grain shine through, or you can apply two coats for a more opaque finish. This finish resists stains, repels water and other household spills, and smooths the wood's surface. Compared to conventional finishes, Osmo's plant-based ingredients create a more even color payoff. Plus, it won't peel, crack, flake, or blister like urethane-based finishes do. 


You can use this finish for a variety of interior applications including: wall paneling, molding, trim and beams, and doors. It's also suitable for edge-glued panels, chipboard and MDF. Ideal as a color base coat for wood floors and for refinishing darkened wood surfaces. Highly recommended for furniture and children’s toys. When dry the finish is non-toxic and resistant to sweat and saliva.


Note: only one coat of Osmo Wood Wax Intensive Finish is recommended for flooring. If you apply it as a base coat for flooring, it must be sealed with Osmo Polyx Oil to protect the pigments.



  • Wood surfaces must be clean, dry and free from surface dirt and debris.
  • Surface coatings such as paint, varnish and other surface sealers must be fully removed by sanding or with a suitable paint and varnish remover
  • Sand carefully before application starting with a coarse paper – final sanding for flooring should be with a P80 to P120 grit sandpaper and P120 to P150 for furniture
  • Thoroughly remove all traces of sanding dust with a vacuum cleaner before application



Osmo Wood Wax Finish is ready to use. Do not thin. Stir well before use. 


Transparent color (one pigmented coat): With Osmo Flat Brush, Oil Finish Applicator Fleece (Hand Pad Holder), Microfiber Cloth or Microfiber Roller, apply very thinly to the clean and dry wood surface along the wood grain and spread well. 


For a more subtle, stained effect: Apply thinly with a lint-free cloth and within 20 minutes, wipe away cleanly and evenly. Ventilate well while drying. 


Intensive color (two pigmented coats): With Osmo Flat Brush or Microfiber Roller, apply very thinly to the clean and dry wood surface along the wood grain and spread well. Ventilate well while drying. Apply the second coat - also thinly. 


Note: Larger areas can also be coated by using a scraper. Afterwards buff in with a white pad. 

Important: For mechanically loaded areas, such as flooring, we recommend max. one coat and a thin top coat with a clear Osmo Polyx®-Oil. In general, an intensive color (two pigmented coats) is not recommended for flooring due to the risk of applying too much product.


Drying time: 24 hours per coat. 


WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container.


Tip: The microfiber roller should only be saturated lightly. A lightly saturated roller will allow the user to cover approximately 43-53 ft2 (4-5m2) of flooring. Please be aware that Osmo Wood Wax Finish has a high yield (see product label). Product excesses and roller tracks must be roller or smoothed out immediately.



Tinting: Osmo Wood Wax Finish can also be used to lightly tint Polyx®-Oil 3054 up to a ratio of 10:1. Do not exceed a ratio of 10 parts Polyx®-Oil 3054 to 1 part Wood Wax Finish.





Regular Cleaning

Surfaces treated with Osmo Wood Wax Finish Transparent should be dry wiped from time to time with a soft lint free cloth. To remove day to day, dust, dirt, scuffs and light marks use Osmo Spray Cleaner.


Deep Cleaning

For more stubborn marks, light scratches or if the surface is starting to look tired or worn, an application of Osmo Liquid Wax Cleaner may be required.

Additional Information


Colours3101 Clear, 3102 Lightly Steemed Beech, 3103 Light Oak, 3104 Red, 3105 Yellow, 3111 White, 3118 Granite Grey, 3119 Silk Grey, 3123 Pine, 3125 Blue, 3131 Green, 3132 Grey Beige, 3136 Birch, 3137 Cherry, 3138 Mahogany, 3143 Cognac, 3161 Ebony, 3164 Oak, 3166 Walnut, 3168 Oak Antique, 3169 Black, 3172 Silk, 3181 Pebble, 3186 White Matte, 3188 Snow
Sizes2.5L, 375mL, 750mL, Sample Sachet (5mL)
Application Temp.+5°C to 35°C
Approx. Coverage24m²/L (258ft2/L) with one coat
Approx. Dry Time24 hours
Number of Coats1 coat = Transparent Color 2 coats = Intensive Color


Data Sheets