This design features a single tongue and groove panel set in a classic rail and stile frame. Solid wood is used throughout for an authentically luxurious look. The Monterey is a classic pivot door that emphasizes the beauty of real wood.
Choose between a freestyle turnstile pivot or the M+ pivot, which offers adjustable holding and damping, allowing the door to stay open when needed. The M+ pivot also features adjustable closure speeds, making it more accessible.
Like all RealCraft entry doors, the Monterey Tongue and Groove Pivot Door is available in over twenty wood species, including American classics like Premium Walnut and White Oak, as well as exotic options like Sapele Mahogany, and Wenge. Handcrafted by skilled artisans with traditional joinery techniques, this door is built to last. It carries the passion and expertise of its makers in every inch.
Our exterior pivot doors include an exclusive white oak threshold and brush sweep to prevent water damage to the jamb. We test-fit the pivot hardware in the threshold to ensure correct placement, making installation a breeze. And we offer three options for door jambs, including the same species as the door for a cohesive look. Sidelights and transoms with insulated glass can be added to further enhance your entryway.
Skilled artisans make all our doors by hand onsite in Gig Harbor, a small seaport town on the Puget Sound in Washington State.
Wood Species
RealCraft offers twenty different wood species, ranging from traditional to exotic.
One of the reasons we love real wood so much is that it carries the character of its natural habitat. Wood species respond differently to humidity and temperature conditions. If you aren't sure which wood species to pick, call us at 1-800-694-5977.
Note that exterior Cedar doors come with a Douglas Fir jamb.
Transom & Sidelights
RealCraft's Transom and Sidelights are made with the same wood as your door, for a cohesive and premium look.
What is a transom?
A transom window refers to a window above a door slab, typically (but not always) separated by a transverse horizontal structural beam.
What are sidelights?
Sidelights are narrow windows that flank a door slab. You can have one side light or two, one on each side of the door. You can also combine one or two sidelights with a transom. Sidelights make your entry door look more visually striking.
Benefits of transom and sidelights:
Our transoms and sidelights are built with the same wood species as your door, for a beautiful custom look
Lets in more natural light
Improves curb appeal
Increases home value
Completely transforms your entryway
Please note that RealCraft Sidelights and Transoms are non-operable, meaning they do not open or close. To add an operable side light or transom, please contact our custom sales department at253-853-3811.
Pivot Options
The System M+ Pivot Door Hardware is a versatile top pivot designed to work with all pivot doors. It offers the ability to position the system 70 mm from the door's side, which helps reduce unused space while maintaining the distinctive pivot door movement. The System M+ can be placed in any position between 70 mm and the center of the door, making it suitable for many project specifications. With these features, the M+ is an excellent choice for those seeking a flexible and efficient pivot system for their project.
The M+ Pivot Hardware Benefits
Dual-acting pivot + closer
Minimum thickness: 1-9/16" (40mm)
Hold positions at ±90° and 0°
Closing to 0° from ±90° and ±125°
Adjustable Damper Control
Adjustable Back-check providing resistance upon opening
Unlimited door height
Class 5 Corrosion Resistance
Maintenance-free
ADA-compliant models are available
Three independent speed adjustments.
Door Handing & Swing Direction
To determine door handing: Stand with your back to the side of the jamb where the pivot will be closest to. Then let your arm be the door and note whether the door swings to your right or your left. If it swings to your left, it is a left-handed door. If it swings to your right, it is a right-handed door.
To determine “inswing” or “outswing”: First, stand outside your house. Then, when your door opens does it open into the house? Then it is an inswing door. Does it open out from the house? Then it is an outswing door.
Note: Inswing doors are more typical for entry doors.
Pre-Hung Door Jambs
There are three options for jamb material:
Hemlock, the industry standard
Douglas Fir, an upgraded option
Door Matched wood, for a premium look
Jamb measurements: Door width plus 2 3/8" (plus another 1/2" with concealed hinges)
Minimum rough opening: Door width plus 2 3/4" (plus another 1/2" with concealed hinges)
Please note that exterior casing/trim is not included.
Pre-Hung Door Threshold & Sweep
Pre-hung doors come with an exclusive white oak threshold. Our white oak threshold offers superior water protection and wear resistance. We use a pure silicone, adjustable Swiss weather sweep set into the bottom of the door. Kerfed weatherstripping is standard. If you need an ADA threshold, call us.
Door Maintenance
Maintenance is key to protecting your investment. If you live in a place that has big temperature changes between seasons, you may need to tighten or lubricate your hinges from time to time. You should also adjust the door sweep to make sure it keeps the door sealed against the elements over time.
Our water-based top coat finish will need a refresh every 1-3 years depending on your door's exposure to elements. Large temperature & humidity changes, direct exposure to sunlight, and seaside environments all can affect how often a door needs refreshing. Expect to fully strip and refinish your door every 6-7 years.
If your door gets dirty (weather, pets, children, etc.) you can clean it with a gentle soap and water. If you have to clean the hinges for any reason, make sure they dry thoroughly.
Financing
We’re proud to offer Shop Pay Installments! Buy today and pay in 4 or more payments starting at 0% APR. If you finance your purchase with Affirm (Shop Pay Installments), your first payment is due approximately two weeks after your purchase is finalized. Please note that due to extended delivery times, your loan payment(s) may be due before you receive your purchase.
Shipping Protection
We've partnered with UPS Capital to introduce an advanced shipping protection plan. This plan shields your purchases against any unforeseen events during transit. Guard your package against loss, theft, or damage. Visit our Shipping Protection page to learn more.
Installation Help
Download the installation guide for pivot doors, which also includes tips for adjusting the pivot closure speeds, latch control, and hydraulic back check. Check out FritsJurgens' installation videos for more guidance.
Questions?
For frequently asked questions about choosing a door and hardware see our FAQ page. And feel free to reach out any time to speak to a qualified consultant by calling (253) 853-3815.
Ordering a pre-hung door means the door jamb is included. Therefore measurements for pre-hung doors should take into account the overall Unit Measurements and the Minimum Rough Opening where it will be installed.
Calculating Unit Width Measurements for Pre-hung Doors
With no sidelights: Door Width + 2-3/8" for Unit Width + 3/8" per side minimum for Rough Opening Width
With one sidelight: Door Width + Sidelight Width + 4-1/2" for Unit Width + 3/8" per side minimum for Rough Opening Width
With two sidelights: Door Width + Sidelight Widths + 6-3/4" for Unit Width + 3/8" per side minimum for Rough Opening Width
Calculating Unit Height Measurements for Pre-hung Doors
With no transom: Door Height + 2-5/8" for Unit Height + 3/8" minimum for Rough Opening Height
With transom: Door Height + Transom Height + 4-5/8" for Unit Height + 3/8" minimum for Rough Opening Height
Please note that any door or door unit that measures more than 90 inches in both width and height will be shipped as a kit with jamb legs disassembled and side light glass separate. This is done to comply with crate size limits on freight trucks.
We highly recommend adding a clear or stain finish to your door to protect it and make sure that it is eligible to be covered by our warranty. A clear finish not only protects your door, it also enhances its beauty and brings out the color and detail of the grain. Stain finishes can intensify or adapt the color of the wood and provide additional protection against fading. Visit our wood species page to learn more.
We offer the following finish options:
White Primer: Added to Paint Grade Hardwood. For this option, we use only high-quality hardwoods like European Beech or Red Grandis. These species provide a smooth surface for paint.
Luxe Clear Satin Finish: An oil finish base, sealed with a satin-texture water-based top coat.
Luxe Oil Stain Finish: A pigmented oil finish base, sealed with a satin-texture water-based top coat.
RealCraft's wood options with Luxe Clear Satin Finish applied:
Click and drag left and right on the image to see how the wood species look Unfinished vs. with Luxe Clear Satin Finish.
Slide Right to see the Unfinished Wood Species.
Slide Left to see the Luxe Clear Satin finish.
Discover Our Materials For Yourself
Discover Our Materials For Yourself
Discover your perfect wood choice from our premium selection. See how they look in your home for the most accurate glimpse of your new wood product. Plus, enjoy a $100 credit towards your next RealCraft purchase of doors, mantels, shelves, or countertops.
Discover your perfect wood choice from our premium selection. See how they look in your home for the most accurate glimpse of your new wood product. Plus, enjoy a $100 credit towards your next RealCraft purchase of doors, mantels, shelves, or countertops.
Handcrafted and tested on-site for an effortless installation.
00:00
Made By Hand
Made By Hand
We are proud to offer products that are handcrafted from start to finish. With decades of expertise, our artisans mix tradition and innovation to create the most distinctive doors in the market. True masterpieces that will last for decades to come.
We are proud to offer products that are handcrafted from start to finish. With decades of expertise, our artisans mix tradition and innovation to create the most distinctive doors in the market. True masterpieces that will last for decades to come.
The Best Materials
The Best Materials
All of our products are built using the best lumber available and are made with 100% Solid Wood, always.
All of our products are built using the best lumber available and are made with 100% Solid Wood, always.
Best in Class Hardware
Best in Class Hardware
The System M+ is a versatile top pivot designed to work with all pivot doors. It offers the ability to position the system 70 mm from the door's side, which helps reduce unused space while maintaining the distinctive pivot door movement.
The System M+ is a versatile top pivot designed to work with all pivot doors. It offers the ability to position the system 70 mm from the door's side, which helps reduce unused space while maintaining the distinctive pivot door movement.
Make it Yours
Make it Yours
Add Transom and Sidelites for a complete look.
Add Transom and Sidelites for a complete look.
Giving It Back
Giving It Back
For every door we sell, 25 new trees are planted worldwide.
For every door we sell, 25 new trees are planted worldwide.
FAQ
A pivot door is a unique and contemporary door design that operates on a rotating axis, unlike traditional hinged doors. Pivot doors use a pivot point on the top and bottom of the door, creating a smooth and seamless motion. These doors are known for their elegant appearance, spacious entryways, and architectural appeal.
A pivot door works by utilizing a pivot point at the top and bottom of the door, allowing it to swing open in a smooth, circular motion. The pivot point is usually offset from the center, providing a larger entrance and a unique visual appearance.
Yes, pivot doors can be as secure as traditional hinged doors. RealCraft pivot doors are built with solid wood and high-quality hardware, ensuring security and durability. The M+ pivot system, for example, features latch control, ensuring that latching bolts remain closed and doors cannot be easily forced open.
Maintaining a pivot door is simple. Regularly clean the door surface with a damp cloth and mild detergent, and check the pivot hardware for any signs of wear or damage. Periodically lubricate the pivot mechanism with a suitable lubricant to ensure smooth operation and prevent squeaking.
To adjust pivot door hinges, first identify the specific adjustment points on your pivot hardware system. Most systems, including the M+ pivot system, allow for adjustments to the damper control, speed control, and latch control.
Installing a RealCraft pivot door is a straightforward process, thanks to the pre-installed hardware on the door jamb and threshold. This ensures a smoother and more efficient installation. Start by preparing the doorway, ensuring it is level, square, and plumb. Then, follow the provided instructions to attach the pivot hardware to the door and door frame. Once properly aligned, adjust the pivot system settings as needed.
The pre-fitted hardware on RealCraft pivot doors simplifies installation by ensuring that all necessary components are professionally installed and properly aligned before shipment. This reduces the need for on-site adjustments and ensures a smooth, hassle-free installation process.
The M+ pivot door hardware system offers several advantages:
Smooth and controlled door operation with adjustable speed and latch control
Slam-proof functionality for added safety and noise reduction
ADA Friendly Access Compatibility
High-quality materials and craftsmanship for durability and longevity
Ease of installation and adjustment
Choosing a RealCraft pivot door offers numerous benefits:
Handcrafted solid wood construction for superior quality and durability
A wide variety of wood species and customization options
Pre-installed M+ pivot system for ease of installation and smooth operation
Matching wood sidelights and transom addons for a cohesive look
Environmental commitment: 25 trees planted per door sold
Warranty, financing options, and customization consultations
Yes, RealCraft pivot door hardware can handle heavy doors with ease. The M+ system is designed to accommodate a wide range of door weights, from light doors to heavy doors, ranging from 175 lbs to 1000 lbs. This means that even if you have a very large and heavy door, the pivot hardware is more than capable of handling it. RealCraft's commitment to quality and durability ensures that your door operates smoothly and securely, no matter its size or weight.
At RealCraft, we proudly offer a warranty, financing options, and customization consultations to ensure our customers have the best possible experience. We stand by the quality of our products with a warranty, giving you peace of mind in your investment. Our partnership with Bread Financing provides easy and affordable financing options, allowing you to pay for your purchase over time at competitive interest rates. Additionally, our team of experts is available for customization consultations, helping you design the perfect pivot door to match your unique style and preferences.
to see the Unfinished Wood Species.
to see the Luxe Clear Satin finish.
