HOME > AUTOMATIC DOOR OPENERS > FREMONT CEILING MOUNTED OUTSWING GARAGE DOOR OPENER
Starting At: $674.00
The Automatic Fremont Swing Out Garage Door Opener (AOCM) is unlike any other. With its patented German engineering, this swing-out garage door opener is uniquely suited to operate out-swing carriage doors. The Fremont is durable, surprisingly quiet, and very easy to install. This opener is an affordable and reliable solution without compromising on performance.
Check out our collection of carriage doors to pair with your Fremont opener!
The Fremont Swing Out Garage Door Opener offers quiet operation and unique design thanks to its patented technology. A traveling 24V DC motor attaches directly to the outswing doors via pushrods, offering extremely quiet operation. This opener uses the smallest number of moving parts of any opener on the market, so it's exceptionally durable. The control board also has a motor brake function, meaning if the motor speed is exceeded, the motor brake actively uses the brake resistor.
SUITABLE APPLICATIONS
FEATURES:
INCLUDED IN THE KIT:
ADDITIONAL ACCESSORIES (sold separately):
INSTALLATION RECOMMENDATIONS:
COMPATIBLE CONFIGURATIONS
Free shipping*. Most orders ship same day when ordered by 12:00 PM Pacific Time.
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
The Automatic Fremont Swing Out Garage Door Opener (AOCM) is unlike any other. With its patented German engineering, this swing-out garage door opener is uniquely suited to operate out-swing carriage doors. The Fremont is durable, surprisingly quiet, and very easy to install with our installation manual specifically written for this out-swing application. This opener has proven to be an affordable and reliable solution for many years. We are convinced that the Fremont will meet your needs and exceed your expectations.
The Fremont Swing Out Garage Door Opener offers quiet operation and unique design through its patented technology. A traveling 24V DC motor attaches directly to the outswing doors via pushrods, offering extremely quiet operation. This opener uses the smallest number of moving parts of any opener on the market, making it exceptionally durable. The control board has a motor brake function, meaning if the motor speed is exceeded, the motor brake actively uses the brake resistor.
SUITABLE APPLICATIONS
FEATURES:
INCLUDED IN THE KIT:
ADDITIONAL ACCESSORIES (sold separately):
INSTALLATION RECOMMENDATIONS:
COMPATIBLE CONFIGURATIONS
There are also terminals that allow you to hook up to your home automation system, and automatically has operated with a soft close and open feature. The force process and positions are always known by the control unit, and any changes (attempted break-in) will be recognized by the operator. Because of the learning mode (otherwise called Autoset), the motor will learn the force required to move the door during the initial setup. This means the operator will not run at full strength (unless needed), but instead adapts to your application. With this operator there is only one limit stop located on the rail that needs to be adjusted, leaving the closing position to be programmed. The motor carriage is simply laid out and pre-installed on the rails. There is already a light located on the control unit with mounting holes pre-drilled, and a vacation button for your convenience. The control unit is connected to the rail with a pre-installed wire connector, allowing the control unit to be mounted anywhere that is convenient. The Fremont requires zero maintenance and comes with a lifetime warranty on the whole unit, plus a 2-year warranty on all accessories.
Battery Backup is available for our customers purchasing this unit (required for California residents) and will hold a charge for 24hrs after losing power and can operate 1-15 uses of one charge. This system is meant for emergency situations not for long-term use without power. The life of the batteries will last about 8-10 years!
Free shipping*. Most orders ship same day when ordered by 12:00 PM Pacific Time.
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
Our exclusive hardware product lines are made using the best raw materials. We make hardware that is durable and beautiful.
We are proud to offer products that are crafted using traditional building methods. We make hardware that will last for generations.
Only at RealCraft you will find some of the most unique and modern barn door hardware designs on the market. We make hardware that stands out.
Take a look at these incredible and unique Carriage Style Gare Door Ideas to inspire your next project!
Get inspired by this beautiful set of Douglas Fir Carriage Doors made to our neighbor McIntyre Furniture!
Explore these 5 unique benefits that Carriage Doors offer compared to traditional rollup garage doors.
Barn Door installations are pretty straightforward, but you might want some help. Take a look at our Installation Guides to make sure you are ready when your Barn Door arrives.