HOME > AUTOMATIC DOOR OPENERS > EDISON AUTOMATIC SLIDING BARN DOOR OPENER
Edison Automatic Sliding Barn Door Opener Base
The Edison Automatic Sliding Door Opener provides convenience and accessibility for sliding door applications. The motor and track mount to the ceiling or wall above the opening and the arm connects to the door. With the click of a button, the automated doors slide horizontally to open or close.
Check out our collection of carriage doors to pair with your Edison opener!
Sold out
Optional Accessories
24" RAIL EXTENSION
Sold out
43" RAIL EXTENSION
Sold out
Doors over 8 feet require Rail Extensions.
Two Button Wireless Garage Door Control
Sold out
4 Button Garage Door Remote Transmitter
Sold out
Outdoor Wireless Garage Door Opener Keypad
Sold out
Battery Backup
Sold out
Magnetic Lock
Sold out
SOMweb
Sold out
*The Battery Backup Unit is required for California residents. Shop all accessories
- Description
- More Info
- Technical
- Reviews
Edison operators use a direct drive technology to maximize strength and minimize moving parts. This also keeps the Edison super quiet. These models are ideal for installations with limited back room or where the building was not wired for a garage door operator ahead of time. The connector wire allows the control housing to be mounted anywhere within 16' of either end of the operator rail. Please note that operator controls are required to be a minimum of 5' from a moving door for safety.
SUITABLE APPLICATIONS
- New construction or Renovation
- Commercial or Residential
- Garage / Carport
- Gates
- Workshop / Shed
- Pole Barns / Horse Stable
- Airplane Hanger
- Boat & RV Storage Buildings
- & more.
FEATURES:
- 4-channel on board radio receiver for optional functions with 40-slot on board memory
- Engineered to 125,000 cycles in beta stage with third-party certification
- Mid-stop and automatic closing enabled
- Interlock capable
- Monitored safety edge or optical safety edge capable
- Alternate timing for internal and external lighting with radio channel 2
- 12VDC power supply at the motor carriage and 24VDC power supply at the control housing
- Homelink compatible
INCLUDED IN THE KIT:
- Motor carriage
- Control housing with built-in wall controls
- 16' connector wire
- 3-piece track (10'9" of rail for doors up to 9')
- Nickel-plated chain
- Two 4-button remote with visor clip
- Wired safety sensors
- Hardware for installation including door arm, ceiling bracket and straps
- Manuals and low voltage wiring kit
Biparting
- All items above x2
Bypassing
- All items above x2 plus 1 Pass Through Door Sensor
ADDITIONAL ACCESSORIES (sold separately):
- Battery Backup (Required for California Residents)
- Lock
- Alarm/warning buzzer
- Memo
- SOMlink
- And more
INSTALLATION RECOMMENDATIONS:
- Professional installer recommended - Electrician specializing in Low Voltage.
- Member of the trade familiar with low voltage/gate installations
- Builders, Contractors, and homeowners - will vary based on skill level.
COMPATIBLE CONFIGURATIONS
- Single Sliding
- Cascading Doors
- Bi-parting Doors
- Bypassing Doors
Edison operators use a direct drive technology to maximize strength and minimize moving parts and operator noise and vibration. These models are ideal for installations with limited back room or where the building was not wired for a garage door operator ahead of time, since the connector wire allows the control housing to be mounted anywhere within 16' of either end of the operator rail (note that operator controls are required to be a minimum of 5' from a moving door for safety).
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
SECURITY AND SAFETY
- 922.5 MHz radio controls with 128-bit encryption
- Positive push-back by the operator in case of attempted forced entry
- Optional Buzzer and Lock for additional security
- Continuously adjusted force curves for maximum safety and obstacle detection
- Operators adjust speed based on door balance and weight for optimal speed and safety
- Monitored optical safety sensors included
- Optional monitored safety edge can be added
MODELS AND MOTOR SIZES
- 3/4 HP = 600 Newton – speeds up to 9.4" per second – maximum door weight 600 lbs.
- 1 HP = 800 Newton – speeds up to 8.3" per second – maximum door weight 1,100 lbs.
- 1.25 HP = 1100 Newton – speeds up to 7" per second – maximum door weight 1,500 lbs.
COMPATIBLE DOOR CONFIGURATIONS
- SINGLE SLIDING
- Single Door -With one arm and motor.
- Cascading Doors -Multiple doors in an opening, only the lead door has an arm and motor. When the doors open, the lead door “catches” the doors in sequence.
- BI-PARTING
- Two Doors that part in the center of an opening -One door slides open to the left and one door slides open to the right. Each door has one arm and motor.
- Bi-Parting Doors with Cascade -Doors that meet in the center of an opening with multiple doors on each side. Only the lead door has an arm and motor. As the doors slide open the lead door “catches” the doors in sequence.
-
- BYPASSING
- Two doors that slide in front of one another -Each door has one attachment to a motor. Typically for by-passing doors - only half of the opening will be clear at a time.
The Edison Automatic Sliding Door Opener provides convenience and accessibility for sliding door applications. The motor and track mount to the ceiling or wall above the opening and the arm connects to the door. With the click of a button, the automated doors slide horizontally to open or close.
Sold out
Optional Accessories
Doors over 8 feet require Rail Extensions.
24" RAIL EXTENSION
Sold out
43" RAIL EXTENSION
Sold out
Two Button Wireless Garage Door Control
Sold out
4 Button Garage Door Remote
Sold out
Outdoor Wireless Opener Keypad
Sold out
Battery Backup
Sold out
Magnetic Lock
Sold out
SOMweb
Sold out
*The Battery Backup Unit is required for California residents. Shop all accessories
- Description
- More Info
- Technical
- Reviews
Edison operators use a direct drive technology to maximize strength and minimize moving parts and operator noise and vibration. These models are ideal for installations with limited back room or where the building was not wired for a garage door operator ahead of time, since the connector wire allows the control housing to be mounted anywhere within 16' of either end of the operator rail (note that operator controls are required to be a minimum of 5' from a moving door for safety).
SUITABLE APPLICATIONS
- New construction or Renovation
- Commercial or Residential
- Garage / Carport
- Gates
- Workshop / Shed
- Pole Barns / Horse Stable
- Airplane Hanger
- Boat & RV Storage Buildings
- & more.
FEATURES:
- 4-channel on board radio receiver for optional functions with 40-slot on board memory
- Engineered to 125,000 cycles in beta stage with third-party certification
- Mid-stop and automatic closing enabled
- Interlock capable
- Monitored safety edge or optical safety edge capable
- Alternate timing for internal and external lighting with radio channel 2
- 12VDC power supply at the motor carriage and 24VDC power supply at the control housing
- Homelink compatible
INCLUDED IN THE KIT:
- Motor carriage
- Control housing with built-in wall controls
- 16' connector wire
- 3-piece track (10'9" of rail for doors up to 9')
- Nickel-plated chain
- Two 4-button remote with visor clip
- Wired safety sensors
- Hardware for installation including door arm, ceiling bracket and straps
- Manuals and low voltage wiring kit
ADDITIONAL ACCESSORIES (sold separately):
- Battery Backup (Required for California Residents)
- Lock
- Alarm/warning buzzer
- Memo
- SOMlink
- And more
INSTALLATION RECOMMENDATIONS:
- Professional installer recommended - Electrician specializing in Low Voltage.
- Member of the trade familiar with low voltage/gate installations
- Builders, Contractors, and homeowners - will vary based on skill level.
COMPATIBLE CONFIGURATIONS
- Single Sliding
- Cascading Doors
- Bi-parting Doors
- Bypassing Doors
Edison operators use a direct drive technology to maximize strength and minimize moving parts and operator noise and vibration. These models are ideal for installations with limited back room or where the building was not wired for a garage door operator ahead of time, since the connector wire allows the control housing to be mounted anywhere within 16' of either end of the operator rail (note that operator controls are required to be a minimum of 5' from a moving door for safety).
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
More Info
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
SECURITY AND SAFETY
- 922.5 MHz radio controls with 128-bit encryption
- Positive push-back by the operator in case of attempted forced entry
- Optional Buzzer and Lock for additional security
- Continuously adjusted force curves for maximum safety and obstacle detection
- Operators adjust speed based on door balance and weight for optimal speed and safety
- Monitored optical safety sensors included
- Optional monitored safety edge can be added
MODELS AND MOTOR SIZES
- 3/4 HP = 600 Newton – speeds up to 9.4" per second – maximum door weight 600 lbs.
- 1 HP = 800 Newton – speeds up to 8.3" per second – maximum door weight 1,100 lbs.
- 1.25 HP = 1100 Newton – speeds up to 7" per second – maximum door weight 1,500 lbs.
COMPATIBLE DOOR CONFIGURATIONS
- SINGLE SLIDING
- Single Door -With one arm and motor.
- Cascading Doors -Multiple doors in an opening, only the lead door has an arm and motor. When the doors open, the lead door “catches” the doors in sequence.
- BI-PARTING
- Two Doors that part in the center of an opening -One door slides open to the left and one door slides open to the right. Each door has one arm and motor.
- Bi-Parting Doors with Cascade -Doors that meet in the center of an opening with multiple doors on each side. Only the lead door has an arm and motor. As the doors slide open the lead door “catches” the doors in sequence.
-
- BYPASSING
- Two doors that slide in front of one another -Each door has one attachment to a motor. Typically for by-passing doors - only half of the opening will be clear at a time.
The Best Materials
Our exclusive hardware product lines are made using the best raw materials. We make hardware that is durable and beautiful.
Made To Last
We are proud to offer products that are crafted using traditional building methods. We make hardware that will last for generations.
Exclusive Designs
Only at RealCraft you will find some of the most unique and modern barn door hardware designs on the market. We make hardware that stands out.
Helpful Links
Explore these 50 Beautiful Carriage Door Ideas
Take a look at these incredible and unique Carriage Style Gare Door Ideas to inspire your next project!
Customer Highlight: Custom Carriage Doors for McIntyre Furniture
Get inspired by this beautiful set of Douglas Fir Carriage Doors made to our neighbor McIntyre Furniture!
5 Benefits of Using Carriage Doors for Your Garage
Explore these 5 unique benefits that Carriage Doors offer compared to traditional rollup garage doors.
Our Technical Guides
Barn Door installations are pretty straightforward, but you might want some help. Take a look at our Installation Guides to make sure you are ready when your Barn Door arrives.