HOME > AUTOMATIC DOOR OPENERS > EDISON AUTOMATIC SLIDING BARN DOOR OPENER
The Edison Automatic Sliding Door Opener provides convenience and accessibility for sliding door applications. The motor and track mount to the ceiling or wall above the opening and the arm connects to the door. With the click of a button, the automated doors slide horizontally to open or close.
Check out our collection of carriage doors to pair with your Edison opener!
*The Battery Backup Unit is required for California residents. Shop all accessories
Edison operators use a direct drive technology to maximize strength and minimize moving parts. This also keeps the Edison super quiet. These models are ideal for installations with limited back room or where the building was not wired for a garage door operator ahead of time. The connector wire allows the control housing to be mounted anywhere within 16' of either end of the operator rail. Please note that operator controls are required to be a minimum of 5' from a moving door for safety.
SUITABLE APPLICATIONS
FEATURES:
INCLUDED IN THE KIT:
Biparting
Bypassing
ADDITIONAL ACCESSORIES (sold separately):
INSTALLATION RECOMMENDATIONS:
COMPATIBLE CONFIGURATIONS
Edison operators use a direct drive technology to maximize strength and minimize moving parts and operator noise and vibration. These models are ideal for installations with limited back room or where the building was not wired for a garage door operator ahead of time, since the connector wire allows the control housing to be mounted anywhere within 16' of either end of the operator rail (note that operator controls are required to be a minimum of 5' from a moving door for safety).
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
SECURITY AND SAFETY
MODELS AND MOTOR SIZES
COMPATIBLE DOOR CONFIGURATIONS
The Edison Automatic Sliding Door Opener provides convenience and accessibility for sliding door applications. The motor and track mount to the ceiling or wall above the opening and the arm connects to the door. With the click of a button, the automated doors slide horizontally to open or close.
Doors over 8 feet require Rail Extensions.
*The Battery Backup Unit is required for California residents. Shop all accessories
Edison operators use a direct drive technology to maximize strength and minimize moving parts and operator noise and vibration. These models are ideal for installations with limited back room or where the building was not wired for a garage door operator ahead of time, since the connector wire allows the control housing to be mounted anywhere within 16' of either end of the operator rail (note that operator controls are required to be a minimum of 5' from a moving door for safety).
SUITABLE APPLICATIONS
FEATURES:
INCLUDED IN THE KIT:
ADDITIONAL ACCESSORIES (sold separately):
INSTALLATION RECOMMENDATIONS:
COMPATIBLE CONFIGURATIONS
Edison operators use a direct drive technology to maximize strength and minimize moving parts and operator noise and vibration. These models are ideal for installations with limited back room or where the building was not wired for a garage door operator ahead of time, since the connector wire allows the control housing to be mounted anywhere within 16' of either end of the operator rail (note that operator controls are required to be a minimum of 5' from a moving door for safety).
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
All RealCraft barn door hardware kits are machined in Washington State, USA.
Our color hardware finishes are powder-coated steel. Unfinished raw steel is just that - the metal is not treated, and it's intended to have a worn and weathered look over time. The material is susceptible to pitting and rust, giving the hardware a time-worn look that meshes well with rustic, shabby chic, and industrial design schemes.
This hardware ships free within the continental United States. Free shipping excludes expedited shipping, international shipments, and oversize orders that require LTL shipping. Fast lead time: In-stock items ship in 1-3 days! Most orders ship same day if ordered by 12 PM Pacific time.
If you're adding a Soft Stop to your flat track hardware, keep in mind that it's recommended for interior use only. Soft stops can be used with flat tracks 5' and longer. If using two soft stops (one at each end of the track), this configuration is compatible with one-piece tracks over 12 feet in length, or with 2-piece tracks 10 feet in length and longer. Even if the overall weight rating for your hardware kit is higher, the weight rating for a Soft Stop is 220 lbs.
Doors are not included with the purchase of hardware.
If you have questions, or if your project requires special consideration, please call 1-800-694-5977. We'd be happy to help!
SECURITY AND SAFETY
MODELS AND MOTOR SIZES
COMPATIBLE DOOR CONFIGURATIONS
Our exclusive hardware product lines are made using the best raw materials. We make hardware that is durable and beautiful.
We are proud to offer products that are crafted using traditional building methods. We make hardware that will last for generations.
Only at RealCraft you will find some of the most unique and modern barn door hardware designs on the market. We make hardware that stands out.
Take a look at these incredible and unique Carriage Style Gare Door Ideas to inspire your next project!
Get inspired by this beautiful set of Douglas Fir Carriage Doors made to our neighbor McIntyre Furniture!
Explore these 5 unique benefits that Carriage Doors offer compared to traditional rollup garage doors.
Barn Door installations are pretty straightforward, but you might want some help. Take a look at our Installation Guides to make sure you are ready when your Barn Door arrives.